Faculdade de Ciências e Tecnologia

Introduction to Materials Science and Engineering



Academic unit

Faculdade de Ciências e Tecnologia


Departamento de Ciências dos Materiais



Teacher in charge

Francisco Manuel Braz Fernandes

Weekly hours


Total hours


Teaching language



To provide the basic knowledge of materials science and engineering, concerning the structure, properties, processing, testing applications and in-service behavior


No special requirement.

Subject matter

Introduction. Chemical bond. Crystalline structure. Structural defects. Mechnical testing of materials: tensile, hardness and impact tests. Structural chracterization of materials. Diffusion. 1st. and 2nd Fick laws. Phase diagrams. Steels and cast iron. Heat treatment of steels. Heat treatment of aluminum alloys. Precipitation hardening. Copper alloys: brasses and bronzes. Heat resistant alloys: nickel superalloys. Shape memory alloys. Polymeric materials: thermoplastic, thermosetting and elastomers; characteristics and applications.; mechanical behavior of polymers. Ceramic materials: superconductors; semiconductors; glasses. Composites: classification; models of mechanical behavior. Corrosion. Materials protection. Failure analysis. Design and selection of materials: demonstration of the program CES (Ashby) for the selection of materials and processes.


Princípios de Ciência e Engenharia dos Materiais. W. F. Smith (translation to portuguese by M. Emília Rosa, M. A. Fortes, L. Guerra-Rosa, M. Fátia Vaz). McGraw-Hill de Portugal, Lisboa.

Ciência e Engenharia de Materiais - Uma Introdução. W.D. Callister, D.G. Rethwisch, 8ª Edição (tradução de S.M.S. Soares), Rio de Janeiro, 2013.

Fundamentals of Materials Science and Engineering. An Integrated Approach, de William Callister Jr, John Wiley & Sons, New York, 2005.

Introduction to Materials Science for Engineers, de J. F. Schackelford, MacMillan, 2nd. edition, New York, 2000.Materials Science on CD-ROM.

Teaching method


The basic concepts about structure and properties of materials are presented during the theoretical lectures in such a way that they can be dealt by the resolution of numerical problems during TP lectures which are taking place during the first 10 to 11 first weeks. These concepts are afterwards consolidated by laboratory sessions where the student performs practical works focussing on the structural characterization of materials and the determination of some mechanical properties (last 4 to 5 weeks).


Evaluation method

Admission to final exam does not require obtaining frequency.

Approval in the UC by continuous evaluation requires:

- to attend at least 2/3 of the total practical sessions,

- to attend the laboratory sessions (mandatory),

- attendance of 1 midterm theoretico-practical (TP) quizz, 1 midterm practical (P) quizz and 1 theoretical (T) quiz that will take place according to the scheduling shown in the planning available from CLIP at "Documentação de apoio / Outros",

The 3 midterm quizzes have the following weights:

- TP, weight 35%,

- T, weight 30%,

- P, weight 35%

For the final approval by continuous evaluation:

- the first midterm theoretico-practical quizz may not be graded below 7,

- final grade on the continuous evaluation above 9.5 required for final approval.

Final grade of the UC:

- final grade of the continuous evaluation, if above 9.5,


- result of the final exam.